1/2 inch PVC Splitter with Brass Mist Nozzle (Pack of 10)

Having purchased several of the pre-fab tubing-nozzle mister kits, these are the ideal solution. Since they are united with a standard 1/2″ PVC Sprinkler Coupler, you can buy the 10 or 20-foot 1/2″ PVC Sprinkler Pipes and design the perfect system for your patio or enclosure, whether it is covered or not. We have both. One is a large Patio with the Roof as an overhang, and another is an area in the center of the patio with a canopy and frame. Since these fittings are universal, you can space them out at the ideal distance for your scenario.. I would recommend making a prototype by using a GHT (Garden Hose Thread) to 1/2″ PVC Adapter, a length of tubing, the nozzle mister connector and a nipple and cap. Don’t cement these together, just twist them tight and use them to see how far each nozzle sprays based on your individual water pressure. That way you know, roughly, how far apart to put each nozzle. I use standard pipe hanger clamps (the little galvanized, curved straps with a screw hole on the flat part) to affix my system up under the eaves, just inside the roofline so the mist can dissipate before hitting the ground and the system itself stays healthy, out of the sun, so it will last forever (or at least a really long time). It’s amazing how much cooler it is sitting in our lounge chairs with the system turned-on. A perfect solution to my frustration with the pre-built kits. Thanks. [...]